Novi Flexible grain auger PSE-127 4m (3-12m) pužni transporter
Zainteresovani ste za oglas?
1/12
1.350 €
Cijena bez PDV-a
Tip:
pužni transporter
Godina proizvodnje:
11/2023
Lokacija:
Ukrajina Lviv
Datum objavljivanja:
21. 4. 2024.
Agronetto ID:
DD36922
Stanje
Stanje:
novi
Važno
Ova ponuda је informativnog karaktera. Za više detalja, pitajte prodavca.
Savjeti za kupovinu
The spring conveyor can operate in both horizontal and vertical positions.
The outer hose material is transparent polyurethane (PU), reinforced with impact-resistant steel or copper wire. Operating temperature: from – 40°С to + 90°С (short-term up to +125°С) manufacturer Italy.
Characteristics:
conveyor type: spiral, pulling
conveyor length, mm: 4000
internal diameter of the hose, mm: 127
outer hose type: polyurethane reinforced
outer diameter of the spiral, mm: 95
spiral strip size, mm: 14*5
grain productivity, t/h: up to 6
drive type: direct
drive: worm gear motor NMRV-063; 1.5 kW; 280 rpm
voltage: 380V (220V via frequency converter)
operating temperature: -40°С +90°С
warranty, months: 12
The flexible polyurethane hose is non-toxic and has a smooth inner surface. Due to the reinforcement of the metal (or PVC) spiral, it has increased elasticity, while at the same time maintaining very high flexibility. European quality control during manufacturing ensures high abrasion resistance. The PU sleeve is capable of antistatic discharge and is also resistant to mineral oils and chemicals.
The material is not subject to destruction under prolonged exposure to ultraviolet radiation.
The design features of the loading and unloading unit depend on the product being transported and the operating conditions of the Minehouse spiral conveyor. A self-selecting mesh or a small loading hopper can be used as a loading neck to vertically feed the product into the conveyor.
Because the flexible spiral screws are pulled, the discharge unit is accordingly connected to the drive platform. A three-phase (or single-phase at the Customer’s request) electric motor or gear motor is used as a drive for the screw conveyor.
Additionally, the screw conveyor can be equipped with a frequency converter to adjust the speed of rotation of the spiral, which will allow you to regulate productivity